Fishing Lure Tips | Fishing Lure Guide!

Pescadores Mexico � Fishing Tournaments in Mexico

Read Jetsetters Magazine at www.jetsettersmagazine.com
To read this entire feature FREE with photos cut and paste this link:
http://www.jetsettersmagazine.com/
archive/jetezine/globe02/Mexico02/mexifsh/
mexfish.html

REELING IN THE HONORS

Spanning the Yucatan to Los Cabos, Mexico offers thousands of species of game fish; Sport Fishing Magazine rates Mazatlan as one of Top 20 sailfish spots in the world.

From the turquoise waters of the Gulf of Mexico to the sapphire blue Pacific Ocean, Mexico offers tourists a variety of fishing experiences for both the most experienced avid angler, and the recreational fishermen.

Whether it’s reeling in a prized striped marlin off Los Cabos, hooking mahi-mahi in the Yucatan, or trying to eclipse the record 988-pound black marlin caught off the waters of Mazatlan, visitors are sure to be lured by thousands of species of fish in one of the world’s top destinations for sportfishing. So get ready to bring in the catch of a lifetime rather than bringing home tales of the proverbial big one that got away.

FISHING HOTSPOTS

Affordability and charm make Mazatlan a prime starting point for fishermen of all levels; from the aficionado to the amateur. With approximately 10,000 sailfish and marlin brought in annually, it’s obvious why Sport Fishing magazine named Mazatlan one of the top 20 sport fishing destinations in the world. Thousands of anglers visit each year and try to break the 1980 record by reeling in a catch bigger than the 988-pound, 12-foot black marlin that was caught off Mazatlan’s shores.

A 407-mile seacoast makes the western state of Sinaloa a leading region for commercial and sport fishing. Straddling the Sea of Cortez and the Pacific Ocean, the state and its popular city, Mazatlan, were discovered by the Spanish explorers in the 1500s and became a bustling port for Galleons returning from Asia in the 17th century.

A large part of Sinaloa remains unexplored by tourists, although enthusiastic bass fishermen often visit the central zone to fish the many wetlands and reservoirs. Today, Mazatlan, the largest port on Mexico’s western coast, is a highly visited beach resort and home to one of Mexico’s most vibrant carnaval celebrations. The modern Marina El Cid was completed in 1995 and includes a 90-slip marina and a deluxe hotel. A second marina is currently being developed in Estero del S�balo, a salt-water estuary. Called Isla Mazatlan, this project will feature lodging, an 18-hole golf course, a tennis center and yacht moorings.

Fishing seasons are as follows: sailfish and dorado (dolphin) from March to December; swordfish and striped marlin from December to April. Tuna can be fished year around. Charter boat prices range from $350 to $400 per day. Two of the eight full-time fleets offering chartered fishing excursions are:

The Star Fleet is the largest sport fishing fleet on the Pacific Coast with more than 40 years of experience in Mazatlan waters. The Fleet consists of 15 boats from 34 to 43 feet, which meet U.S. Coast Guard standards. Fishing trips run daily from 6:30 a.m. to 2:30 p.m. All bait, tackle and ice included. Star Fleet clients have established several IGFA world records, including those for striped marlin and dolphin fish. Phone: 210/377-0451.

In the event that not every member of the family has fishing on their agenda, Mazatlan offers an array of on-land activities, including white, sandy beaches, botanical gardens, snorkeling, shopping, and even an archaeological museum. For more information on Mazatlan visit www.go2mazatlan.com

Nestled against the Sierra Madre Mountains, the sister cities of Ixtapa and Zihuatanejo sit 4 � miles apart along Mexico’s western coastline and welcome visitors to explore dozens of sandy beaches and coves. Fairly recently recognized as a top fishing destination, the waters surrounding Ixtapa and Zihuatanejo are teeming with a variety of game fish including marlin, mackerel, wahoo, yellowtail, yellowfin tuna, dorado (mahi-mahi), and sailfish, the primary game during most of the year.

Ixtapa is arguably the most modern resort town on Mexico’s western coast. Developed by the Mexican government in the 1970s, Ixtapa has an ecologically minded master plan that requires the allocation of half the land as ecological reserve. Making room for the ever increasing number of sport fishermen traveling to the region, the new Marina Ixtapa is comprised of 621 yacht slips, private villas, restaurants and shops, a beach club and tennis center.

For a change of pace, travelers ca

To read this entire feature FREE with photos cut and paste this link:
http://www.jetsettersmagazine.com/archive/jetezine/globe02/
Mexico02/mexifsh/mexfish.html

Kriss Hammond, Jetsetters Magazine Correspondent � Read Jetsetters Magazine at www.jetsettersmagazine.com To book travel visit Jetstreams.com at www.jetstreams.com and for Beach Resorts visit Beach Booker at www.beachbooker.com

About the Author

Kriss Hammond, Jetsetters Magazine Correspondent. Join the Travel Writers Network in the logo at www.jetsettersmagazine.com Leave your email next to the logo for FREE e travel newsletter.

Many people consider that fish are only a medium of survival, or to some extent a food supply; yet there is another angle that is little known. The manufacturing industry utilizes more than two billion pounds of fish and fish by-products every year.
This is slightly more than is used for food. What most people do not know is that fishing continues to provide recreational activity of making it one of the most preferred hobbies. In fact, fishing as a hobby is continuously growing and that is why the estimated number of people who acquire fishing licenses each year is more than 12 million.
Moreover, surveys show that for every dollar spent for a fishing license, there are sixteen dollars spent for equipment, such as fishing tackle, food, clothing, and transportation. There is more money spent on fishing than on any other hobby in existence.
Why is it a Great Hobby? It is a means of providing something to free the mind and body of the worries of the day. It has also been proven to help in mentoring troubled teens, replacing negative thoughts and activity with more positive traits and pursuits. Fishing is truly a wholesome sport.
The use of all types of fishing equipment has added something that no other feature could possibly accomplish. Thousands of youngsters are enthusiastic to learn how to cast a fly or plug bait. These youngsters have an interest in fish and fishing and they desire to fish in a lawful and recreational manner.
Boiled down, fish and fishing may be considered one of man’s essential resources. It is hoped that further realization of fishing as a hobby will develop the necessary knowledge of the true recreational value of fishing, the fish, and the general conservation of all natural resources as well as the value of good sportsmanship and developing good citizens.

How To Create a Huge Opt-In List
Big Opt-In Lists, Trade Secrets & Fishing Trips

Last weekend, on a beautiful Saturday morning, I went fishing with a friend on the Pecos River here in New Mexico. We had been fishing for a couple of hours when my friend decided he would carefully approach the subject of getting more opt-in subscribers for his newsletter. He knew I had over 400,000 opt-in subscribers for T-Shirt King�s newsletter and he wanted to know how I did it. He was afraid that it was a trade secret and I would brush him off and continue to fish. That was my reaction initially.

You see, I get this type of question all the time. When it comes at a time when I�m fishing, a simple answer like that is the easiest, and it keeps us fishing instead of talking. However, this morning I was a softy and, after some prodding, I gave in.

To begin with, let me quickly explain that there are two sales tools that all online retailers should use regardless of what you sell. You should have a newsletter and an affiliate program. My friend already had a newsletter and an affiliate program and I�m going to assume you do too. If you need one - http://www.manzanomarketing.com/Resources/ultimateaffiliate.html

We put our poles down and sat on the edge of the river to discuss how my friend could build an opt-in list of over 100,000 this year. He had a lot bigger expectations for his opt-in list than he did for this fishing trip. He never did get back to fishing.

His first question was about getting people on his site to opt-in. He had an opt-in subscription box on his site already and it was prominently placed. But, with over 5,000 daily visitors, he was only getting about twenty subscribers. It was a real disappointment.

So, my first suggestion was to set up a contest. He could give away just about anything he wanted to from a free t-shirt to a free fishing trip. I use a free t-shirt a day on T-Shirt King. To join the contest, you just have to join the newsletter (opt-in). Check it out � http://www.t-shirtking.com/

The next suggestion was to use a pop-up to promote the contest and the subscription offer. Of course, my friend immediately groaned at the thought of adding a pop-up to his site (for a minute there, I thought we might get back to fishing). However, I told him about using a cookied pop-up that occurs only once a day for each user. This way it minimizes the annoyance of pop-ups. Plus, anyone that really hates pop-ups already has pop-up blocker software. But the proof is in the results. When I added our contest and a pop-up, we did better than quadrupling our subscriber rate. For my fishing buddy, it would take him from 20 opt-in�s a day to over 80.

Note - Free Pop-Up Generator: http://www.manzanomarketing.com/popup.html

The investment for a contest can be minimal when compared to the cost of gaining subscribers any other way. You know that you can find companies that will sell you subscribers for fifteen cents a piece or more � right? Why pay such a high price for poor quality subscribers when you can make a smaller investment and get more subscribers of much higher quality?

At $.15 per subscriber, that�s $15,000 for 100,000 subscribers of questionable quality. Using these methods can cost you less than a hundred bucks for 100,000 high quality, targeted subscribers!

Alright � now for the big guns. Uh, er, the �heavy tackle� - since we�re fishing. Let�s take your list building operation and put it on hundreds, or even thousands, of other websites. There are two methods. Building a newsletter co-op and arming your affiliates with a secret weapon.

These methods use two inexpensive pieces of software that will become a key to selling your product successfully online. Of course, they help you build your opt-in list, but the true end result of a big high quality list will be increased sales. You�re going to love the feeling of sending your newsletter out and watching the sales immediately begin to come in! It�s a great feeling. So is waking up the next morning and checking your sales before you take the day off to go fishing � because you can.

These tools take some effort to set up but once they�re established, they run on auto-pilot which leaves you the time to go fishing. Your co-op members and affiliates do the promoting and list building for you.

The first tool is Opt-In Explosion. This is a newsletter subscriber co-op. You�ve probably seen them run by other people. You could join one of these co-op programs and you would substantially increase your subscriber rate. Or, you could start your own co-op and build your opt-in list at hyper speed.

You see, when you join their lists, typically, you get your newsletter subscription offer shown four times for every time you show the co-op subscriber box. Not bad. But start your own co-op and it�s your members that get four exposures for every one time they show the subscription offer. You get your newsletter offer shown on every exposure, on every website, to every visitor � every time. If you even get a small number of members, your subscription rate will explode!

To see this tool, visit: http://www.optinexplosion.com

At this point, my friend was so excited, he wanted to leave this beautiful Saturday morning, quit fishing (he�s obviously not making enough money) and start right away. However, I saved the best for last.

Newsletter Syndicator! How about putting your subscription sign-up box prominently on hundreds, or even thousands, of websites? And, you can offer the webmaster credit for the sales of your product generated from their list? What a great idea! This little program allows you the ability to give out subscription boxes to your affiliates. They can put them on their site and begin building opt-in subscriber lists specifically for your newsletter.

Using Newsletter Syndicator, when you send your newsletter out it will automatically replace your standard url with their affiliate url. Your newsletter with your url and the affiliate�s get your newsletter but with their unique affiliate url. It�s easy for you to set up and it�s easy for your affiliates to set up. Makes you money and makes your affiliates money. Even if you have a small website with very little traffic, one good affiliate can sign-up more opt-in subscribers in a month than you would get all year.

To find this tool, go to: http://www.newslettersyndicator.com

At this point, my friend was no longer interested in fishing. When I was done talking, he packed up and headed for the car to get back to his website. I was glad we drove separately. I settled back in to a nice day of fishing. I could afford to because I knew that I was getting a whole lot more opt-in subscribers during that day of fishing than I was fish. In fact, there�s a limit to the number of fish I can get in a day. There�s no limit to the number of opt-in subscribers.

You can get both programs for under a hundred dollars. At fifteen cents per subscriber, that�s only 667 subscribers. You�ll get more than that in no time. With some honest effort, 100,000 high quality opt-in subscribers this year is very possible.

It�s not rocket science and it�s a lot easier than catching those Pecos River Browns. Give these three methods a try and you will get to know the excitement of sending your newsletter out and watching the sales roll in. There�s nothing like it.

� 2003 by Bill Broadbent ———————————————————– Written by Bill Broadbent Free eBook Available � Affiliate Detective 1.0 Visit: http://www.affiliatedetective.net ———————————————————–

About the Author

Written by Bill Broadbent http://www.ManzanoMarketing.com Free eBook Available � Affiliate Detective Visit: http://www.affiliatedetective.net

If you decide to take a fly fishing trip, you may get astonished how readily the trout will peck, having in mind a few tips. Many enthusiastic anglers, no matter how inexperienced they are, soon come to realise that fly fishing can be extremely easy. You just need to learn a few things about casting, presentation, retrieving and fighting the fish.
But these can be easily picked up, if you have good instructor. Going on a fly fishing trip is great on Lake Taneycomo, and many novices have learnt their first fly fishing lessons there. Lake Taneycomo is famous for the midge hatch.
That is why many anglers take a fly fishing trip to its coasts. Midge hatch is the only hatch that occurs there every day of the year. What are midges? They are small bugs, their colors differ from brown and cream to olive or black. Midges are just like most bugs, and they begin their existence on the bottom of the lake.
The warm mud helps the eggs grow and get prepared to hatch. They hatch as larvae and start feeding mainly with rotten plants until they are strong enough to leave the muddy bed and swim up looking for better water conditions. Trout feast on their migration, making the best of it. The larvae which survive soon begin the process of pupation. Pupas are mutating fast , and soon their wings are well-shaped.
The legs and abdomens are also changed. The pupation process takes place near the surface of the water, which is called "film". Pupas swim to the surface, where they start crawling out of their skin, finally emerging out of the water as full- grown adult midges, with heads and wings. You need to know these details about midges before starting your fly fishing trip, as the success depends mainly on them, because they are trout’s basic food. For more information click Fly Fishing Trip Trout use the pupation for gorging up with young midges.
They catch the moment when the pupas are swimming up their way to the surface, as they are too slow to escape from the fast swimming fish. Trout are easy to be seen on the surface or near the film, where they are having their meal.
They even spring out of the water to swallow the new born midge. When feeding, trout are the easiest catch. So, if you plan to take a fly fishing trip, you had better put a dozen of targeting flies that imitate midges. There are several types of different flies, such as Zebra, Brassie, Midge Pupa, Miracle, Thread Midge, Loop Wing, Crackleback, Renegade, Griffin’s Gnat, Emerger, Krystal Pupa, RS2 and WD40. They can be used as soft hackle, either on the surface or the film. As you have understood, fly fishing is easier than it may seem.
Going on a fly fishing trip is really a nice way to spend your holiday. Even the most inexperienced novice can learn to catch a trout if he or she comply with the trout’s meal hours. Another advantage of going on a fly fishing trip to Lake Taneycomo is that hatching and pupation are in progress all the year round. Every day there are hungry trout to be caught by a cunning angler.
So, you’d better try it. Get you bags packed and start on an adventurous fly fishing trip!

Lets start with the basics, you need a clean solid work surface such as a bench, table, or desk, you will need a vise which will hold the various lures for drilling, filing, bending, and other operations. Almost any bench vise of good size will serve the purpose. Unless you have a permanent workbench, this vise doesn’t have to be fastened to the table or desk until needed.

A small anvil is also useful if you plan to make many metal lures or parts for such lures. It is used for cutting, bending, punching, and riveting. However, if you get a big bench vise of the machinist’s or utility type you can use the anvil surface found on such vises. Or you can use a small block of iron with a smooth surface as a makeshift anvil.

A hammer, of course, is a basic tool for any kind of work, and for making fishing lures, about two or three hammers will suffice. If you already have a claw hammer, you can use it for many lure-making jobs. However, you should also get at least one ball peen or machinist�s hammer which can be used for shaping metal, driving punches, cold chisels, and other uses. A 12-ounce ball peen hammer is a good size for all-round work. Another type of hammer which is good to have is a soft-faced hammer. These are made of plastic or have rawhide, fiber or lead faces. The soft-faced hammer is used for bending and shaping metal and leaves no tool marks. A wooden mallet is also needed if you plan to shape your own metal spoons or spinners.

At least two saws will be needed. If you already have a hand saw, it can be used for working with wood. Since most lures are small, however, a back saw which has a thin blade and fine teeth is even better than a large hand saw with coarse teeth for accurate cutting. The other saw which is needed is a hacksaw that is used for cutting metal and other hard materials such as plastics. There are many types of hacksaws on the market, but the adjustable frame with a pistol grip is best. You will also need several kinds of blades to use with the hacksaw. These blades have from 14 to 32 teeth to the inch and come in all-hard or flexible tempers. Each type is best for a certain job, depending on the metal or material you are cutting. If you have one or two blades of each kind you’ll be prepared for any cutting job.

Some kind of drill is needed for drilling holes in wood and metal. If you have a home workshop with a drill press you can use it for most of the work to be done. It is especially useful when drilling holes in metal. A portable electric drill is also a big aid when drilling, metal, especially if you have to drill many holes. However, when making fishing lures most drilling is done in wood or softer metals such as brass and copper. Here an ordinary hand drill will serve the purpose. Such a hand drill will usually take drills up to � in. in diameter. When buying a hand drill it’s a good idea to get the best you can get. A cheap hand drill may not work properly or will soon break or wear out.

You also need a set of twist drills to use with an electric or hand drill. For the drill press or electric drill you will need a set of high-speed drills. The high-speed drills can be used for fast drilling without losing their temper. For drilling wood or soft metals, carbon drills which are cheaper than high speed drills can be used. You should get a complete set of drills up to about � in. in diameter. The smaller sizes are the ones you will use most often. It’s a good idea to buy two or three twist drills of the same size in the smaller sizes so that if you break one you’ll have a spare.

Article Source: http://www.articledashboard.com

Peter Rosienburg is an avid outdoors man, camper, fisher and hiker. He has researched the lure making industry and published the findings on his website www.fishing-ebooks.com/make-fishing-lures.htm